Make Every Flag Portable!

15' Flagpole To Go (actual length 14' 4 ")
18' Flagpole To Go (actual length 17' 2 ")
20' Flagpole To Go (actual length 20')

LD-20 20 foot Large Diameter Flagpole

Industrial strength flagpole extends to a full 20 feet and is 2.5” in diameter at base with spring buttons to lock each section into place. Free 3’ x 5’ U.S. Flag included. Topped with a gold ball and complete with anti-furl clips that keep flags from winding around flagpole and allows you to fly two 3’ x 5’ flags. Durable anodized aluminum construction prevents rusting. Comes complete with PVC ground sleeve to mount the pole in the ground.

LD-TM: Tire Mount For Large Diameter Flagpole Only

Tire secured flag stand holds your Large Diameter Flagpole-To-Go or any flagpole up to 2-1/2” in diameter at tailgate parties, campsites, garage sales, store promotions— anywhere you want to display a flag.

2-piece design collapses for easy storage
Lightweight, durable steel construction weighs just 6 lbs.
Attractive high performance enamel coating prevents both oxidizing and corroding
18" long base for secure hold

LD-HM: Hitch Mount For Large Diameter Flagpole Only

Great way to fly your flag from your car, RV or truck trailer hitch. Simply slide the Hitch Mount into the receiver. Lock the mount into the receiver with the pin.

Lightweight with a durable silver painted finish and easy to carry in any vehicle

Note: The HitchMount may only be used when thevehicle is parked. This mount works with any 2 inch receiver.

FLPOW: 3’ x 5’ POW Flag

Screened POW logo on both sides of poy-endura material. Face of logo is the same direction on both sides of flag. Made in the USA.

Use your flag pole with any of these three mounts:

6' Flagpole To Go (actual length 5' 10")
9' Flagpole To Go (actual length 8' 8 ")
12' Flagpole To Go (actual length 11' 6 ")

Fits in most wall brackets.

Our sturdy fiberglass flagpole is rust proof and non conductive. Topped with a silver ball and complete with four no tangle clips that allow you to fly two 3’x 5’ flags at once. Lightweight and closes down to 51 inches!

5-Foot 4-Piece Aluminum Flagpole

Each flagpole comes complete with clips to hang your flag and is topped with a gold decorative tip.

Accommodates decorative flags and flags up to 4x6
Replace your wood pole
Durable aluminum pole is long lasting
4 section allows for easy storage

Ideal for home use, displaying decorative flags, team colors or patriotic spirit.

Fits most 1” diameter poles including our Five Foot Four Tube Aluminum Flagpole.
Set Screw locks flagpole in place.
Cast aluminum bracket for extra strength.
Adjustable angle for flag display.

Fly your flag at a variety of angles from horizontal to vertical with our new Multi Bracket.

Its patent pending design allows you to attach it to a variety of items—including pop up canopies or tents, apartment balconies, decks, boats – just about anywhere you would ever want to fly a flag!

Bracket holds flagpoles up to 1 3/8” diameter.

Available in black or white.

A favorite of motorcyclists everywhere! Fits in your saddlebag when collapsed. For use at parade speeds up to 25 m.p.h.

See our motorcycle mounts for our Hide A Pole below.

Perfect for transporting to any event when space is limited to a backpack jacket or tote bag.
Easily concealed and portable
Accommodates flags from 1’ x 2’ up to 3’x 5’Lightweight 7-piece pole telescopes easily

Motorcycle Hitch Mount Model (Model FP-MHM)

This parade flag holder bar is designed to fit any motorcycle with a trailer hitch. It includes a chrome receiver bracket that is permanently bolted onto the trailer ball and will not interfere with your trailers coupler. The flagpole holder can then be installed or removed from the receiver bracket in seconds by removing two safety pins. Included is one flag holder socket. One or tow more can be added (sold separately below) to accommodate up to three flags. The sockets accommodate up to 1 ¼” poles and are maintained at a 15 degree angle to their bases. They can be rotated and tightened to display your flags, angled to the rear, sides, diagonally, or any combination of these. All components are machined from aircraft quality aluminum and steel and polished to a flawless finish and triple chrome plated.

Harley Davidson Mount (Model FP-HDHM)

This flagpole holder is designed to fit all Harley-Davidson FLT and FLH models. The two small receiver tubes bolt onto the lower fender, and or saddlebag supports and remain virtually unseen. The flagpole holder bar can then be installed or removed from the receiver tubes in seconds by removing two safety pins. Included is one flag holder socket. One or tow more can be added (sold separately below) to accommodate up to three flags. The sockets accommodate up to 1 ¼” poles and are maintained at a 15 degree angle to their bases. They can be rotated and tightened to display your flags, angled to the rear, sides, diagonally, or any combination of these. All components are machined from aircraft quality aluminum and steel and polished to a flawless finish and triple chrome plated.

FP-HDSRB: Bracket for Saddle Bag Guard Rails

This bracket will allow you to use our FP-HDHM if you have a Road King with the Saddle Bag Guard Rails.

Flagpole Holder Additional Sockets (Model FP-MS)

Order additional flagpole holder sockets to display two and/or three flags on either of the above holders. Also use these with the 4-5 Flagpole Holder Bar below.

4-5 Flagpole Holder bar (Model FP-HB45)

Three flags not enough? This large flagpole holder bar accommodates one to five flagpoles. It will replace the smaller bar on either of the above models. Additional flag holder sockets are sold separately above.

United States Flag (FP-US)

Now you have the flagpole and mount of your choice, fly your U.S. flag proudly wherever you go and at home too! 3 foot x 5 foot nylon printed flag with two grommets will attach to any of our poles.

Includes 3 x 5 Screened
U.S. Flag

6 Foot Steel Pole

Mounting Bracket With
Screws

Tangle Free Fastenters
(to attach flag to pole)

Store In Our Reusable
Snap Close Bag